10 fdisk Commands ໃນການຈັດການ Partitions Disk Linux
fdisk ຢືນ (ສຳ ລັບ“ disk disk ທີ່ ກຳ ນົດໄວ້ຫຼື disk format”) ແມ່ນ ຄຳ ສັ່ງທີ່ໃຊ້ກັນທົ່ວໄປທີ່ສຸດ ສຳ ລັບລະບົບ Linux ສຳ ລັບລະບົບ Linux/Unix. ດ້ວຍຄວາມຊ່ອຍເຫລືອຂອງ ຄຳ ສັ່ງ fdisk ທ່ານສາມາດເບິ່ງ, ສ້າງ, ປັບຂະ ໜາດ, ລຶບ, ປ່ຽນແປງ, ຄັດລອກແລະຍ້າຍສ່ວນຕ່າງໆໃນຮາດດິດໂດຍໃຊ້ຕົວ ໜັງ ສືທີ່ເປັນມິດກັບຜູ້ໃຊ້ຂອງມັນເອງ.
ເຄື່ອງມືນີ້ມີປະໂຫຍດຫຼາຍໃນແງ່ຂອງການສ້າງພື້ນທີ່ ສຳ ລັບການແບ່ງປັນ ໃໝ່, ການຈັດພື້ນທີ່ ສຳ ລັບ drive ໃໝ່, ຈັດລະບົບຂັບເກົ່າແລະ ສຳ ເນົາຫລືຍ້າຍຂໍ້ມູນເຂົ້າໄປໃນແຜ່ນ ໃໝ່. ມັນຊ່ວຍໃຫ້ທ່ານສາມາດສ້າງ ຈຳ ນວນສີ່ສ່ວນຫລັກ ໃໝ່ ສູງສຸດແລະ ຈຳ ນວນສ່ວນທີ່ມີເຫດຜົນ (ຂະຫຍາຍ) ໂດຍອີງໃສ່ຂະ ໜາດ ຂອງຮາດດິດທີ່ທ່ານມີຢູ່ໃນລະບົບຂອງທ່ານ.
ບົດຂຽນນີ້ອະທິບາຍ 10 ຄຳ ສັ່ງພື້ນຖານ fdisk ເພື່ອຈັດການຕາຕະລາງແບ່ງປັນໃນລະບົບທີ່ໃຊ້ Linux. ທ່ານຕ້ອງເປັນຜູ້ໃຊ້ root ເພື່ອ ດຳ ເນີນການ ຄຳ ສັ່ງ fdisk, ຖ້າບໍ່ດັ່ງນັ້ນທ່ານຈະໄດ້ຮັບ ຄຳ ສັ່ງ“ ບໍ່ພົບ” ຂໍ້ຜິດພາດ.
1. ເບິ່ງ Partitions Disk ທັງ ໝົດ ໃນ Linux
ບັນຊີ ຄຳ ສັ່ງພື້ນຖານຕໍ່ໄປນີ້ລາຍຊື່ການແບ່ງປັນແຜ່ນທັງ ໝົດ ທີ່ມີຢູ່ໃນລະບົບຂອງທ່ານ. ການໂຕ້ຖຽງ "-l" ແມ່ນຢືນຢູ່ (ລາຍຊື່ການແບ່ງປັນທັງ ໝົດ) ຖືກ ນຳ ໃຊ້ດ້ວຍ ຄຳ ສັ່ງ fdisk ເພື່ອເບິ່ງການແບ່ງປັນທີ່ມີຢູ່ໃນ Linux. ການແບ່ງປັນຈະຖືກສະແດງໂດຍຊື່ຂອງອຸປະກອນຂອງພວກມັນ. ຕົວຢ່າງ:/dev/sda,/dev/sdb ຫຼື/dev/sdc.
fdisk -l Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 2624 20972857+ 83 Linux /dev/sda3 2625 4582 15727635 83 Linux /dev/sda4 4583 77541 586043167+ 5 Extended /dev/sda5 4583 5887 10482381 83 Linux /dev/sda6 5888 7192 10482381 83 Linux /dev/sda7 7193 7845 5245191 83 Linux /dev/sda8 7846 8367 4192933+ 82 Linux swap / Solaris /dev/sda9 8368 77541 555640123+ 8e Linux LVM
2. ເບິ່ງການແບ່ງປັນ Disk ສະເພາະໃນ Linux
ເພື່ອເບິ່ງການແບ່ງປັນທັງ ໝົດ ຂອງຮາດດິດສະເພາະໃຫ້ໃຊ້ຕົວເລືອກ '-l' ດ້ວຍຊື່ອຸປະກອນ. ຕົວຢ່າງ, ຄຳ ສັ່ງຕໍ່ໄປນີ້ຈະສະແດງການແບ່ງປັນແຜ່ນທັງ ໝົດ ຂອງອຸປະກອນ/dev/sda. ຖ້າທ່ານມີຊື່ອຸປະກອນທີ່ແຕກຕ່າງກັນ, ໃຫ້ຂຽນຊື່ອຸປະກອນທີ່ງ່າຍດາຍຄື/dev/sdb ຫຼື/dev/sdc.
fdisk -l /dev/sda Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 2624 20972857+ 83 Linux /dev/sda3 2625 4582 15727635 83 Linux /dev/sda4 4583 77541 586043167+ 5 Extended /dev/sda5 4583 5887 10482381 83 Linux /dev/sda6 5888 7192 10482381 83 Linux /dev/sda7 7193 7845 5245191 83 Linux /dev/sda8 7846 8367 4192933+ 82 Linux swap / Solaris /dev/sda9 8368 77541 555640123+ 8e Linux LVM
3. ກວດເບິ່ງທຸກ ຄຳ ສັ່ງ fdisk ທີ່ມີຢູ່
ຖ້າທ່ານຕ້ອງການເບິ່ງ ຄຳ ສັ່ງທັງ ໝົດ ທີ່ມີ ສຳ ລັບ fdisk. ພຽງແຕ່ໃຊ້ ຄຳ ສັ່ງຕໍ່ໄປນີ້ໂດຍກ່າວເຖິງຊື່ຂອງຮາດດິດເຊັ່ນ/dev/sda ດັ່ງທີ່ສະແດງຢູ່ທາງລຸ່ມ. ຄຳ ສັ່ງຕໍ່ໄປນີ້ຈະໃຫ້ຜົນຜະລິດທີ່ຄ້າຍຄືກັບຂ້າງລຸ່ມນີ້.
fdisk /dev/sda WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help):
ພິມ 'm' ເພື່ອເບິ່ງລາຍຊື່ຂອງ ຄຳ ສັ່ງທີ່ມີຢູ່ທັງ ໝົດ ຂອງ fdisk ເຊິ່ງສາມາດເຮັດວຽກໄດ້ໃນ/dev/sda hard disk. ຫລັງຈາກນັ້ນ, ຂ້ອຍເຂົ້າ 'm' ຢູ່ ໜ້າ ຈໍ, ເຈົ້າຈະເຫັນຕົວເລືອກທີ່ມີຢູ່ ສຳ ລັບ fdisk ທີ່ເຈົ້າສາມາດໃຊ້ໃນອຸປະກອນ/dev/sda
fdisk /dev/sda WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): m Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help):
4. ພິມທຸກຕາຕະລາງ Partition ໃນ Linux
ເພື່ອພິມຕາຕະລາງການແບ່ງປັນທັງ ໝົດ ຂອງຮາດດິດ, ທ່ານຕ້ອງຢູ່ໃນຮູບແບບ ຄຳ ສັ່ງຂອງຮາດດິດສະເພາະເວົ້າ/dev/sda.
fdisk /dev/sda
ຈາກຮູບແບບ ຄຳ ສັ່ງ, ໃສ່ 'p' ແທນ 'm' ດັ່ງທີ່ພວກເຮົາໄດ້ເຮັດກ່ອນ ໜ້າ ນີ້. ໃນຂະນະທີ່ຂ້ອຍປ້ອນ 'p', ມັນຈະພິມຕາຕະລາງການແບ່ງປັນສະເພາະ/dev/sda.
Command (m for help): p Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 2624 20972857+ 83 Linux /dev/sda3 2625 4582 15727635 83 Linux /dev/sda4 4583 77541 586043167+ 5 Extended /dev/sda5 4583 5887 10482381 83 Linux /dev/sda6 5888 7192 10482381 83 Linux /dev/sda7 7193 7845 5245191 83 Linux /dev/sda8 7846 8367 4192933+ 82 Linux swap / Solaris /dev/sda9 8368 77541 555640123+ 8e Linux LVM Command (m for help):
5. ວິທີການລຶບ Partition ໃນ Linux
ຖ້າທ່ານຕ້ອງການລຶບການແບ່ງປັນສະເພາະ (i. e/dev/sda9) ຈາກຮາດດິດສະເພາະເຊັ່ນ:/dev/sda. ທ່ານຕ້ອງຢູ່ໃນຮູບແບບ ຄຳ ສັ່ງ fdisk ເພື່ອເຮັດສິ່ງນີ້.
fdisk /dev/sda
ຕໍ່ໄປ, ໃສ່ 'd' ເພື່ອລຶບຊື່ການແບ່ງປັນໃດໆອອກຈາກລະບົບ. ເມື່ອຂ້ອຍປ້ອນ 'ມັນ' ມັນຈະກະຕຸ້ນຂ້ອຍໃຫ້ໃສ່ເລກແບ່ງປັນທີ່ຂ້ອຍຕ້ອງການລຶບອອກຈາກ/dev/sda hard disk. ສົມມຸດວ່າຂ້ອຍໃສ່ເລກທີ 4 ຢູ່ທີ່ນີ້, ຫຼັງຈາກນັ້ນມັນຈະລຶບແຜ່ນແບ່ງປັນ '4' (i. e/dev/sda4) ແລະສະແດງເນື້ອທີ່ຫວ່າງໃນຕາຕະລາງການແບ່ງປັນ. ກະລຸນາໃສ່ 'w' ເພື່ອຂຽນຕາຕະລາງໃສ່ disk ແລະອອກຈາກຫຼັງຈາກເຮັດການປ່ຽນແປງ ໃໝ່ ຕໍ່ຕາຕະລາງການແບ່ງປັນ ການປ່ຽນແປງ ໃໝ່ ຈະເກີດຂື້ນຫຼັງຈາກໄດ້ເລີ່ມຕົ້ນລະບົບຕໍ່ໄປ. ນີ້ສາມາດເຂົ້າໃຈໄດ້ງ່າຍຈາກຜົນໄດ້ຮັບຂ້າງລຸ່ມນີ້.
fdisk /dev/sda WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): d Partition number (1-4): 4 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks. You have new mail in /var/spool/mail/root
ຄຳ ເຕືອນ: ຈົ່ງລະມັດລະວັງ, ໃນຂະນະທີ່ປະຕິບັດຂັ້ນຕອນນີ້, ເພາະວ່າການໃຊ້ຕົວເລືອກ '' ຈະເຮັດໃຫ້ການແບ່ງປັນອອກຈາກລະບົບ ໝົດ ແລະອາດຈະສູນເສຍຂໍ້ມູນທັງ ໝົດ ໃນການແບ່ງປັນ.
6. ວິທີການສ້າງ Partition ໃໝ່ ໃນ Linux
ຖ້າທ່ານມີພື້ນທີ່ຫວ່າງຢູ່ໃນ ໜຶ່ງ ໃນອຸປະກອນຂອງທ່ານເວົ້າ/dev/sda ແລະຢາກສ້າງສ່ວນແບ່ງ ໃໝ່ ພາຍໃຕ້ມັນ. ຫຼັງຈາກນັ້ນທ່ານຈະຕ້ອງຢູ່ໃນຮູບແບບ ຄຳ ສັ່ງ fdisk ຂອງ/dev/sda. ພິມ ຄຳ ສັ່ງຕໍ່ໄປນີ້ເພື່ອເຂົ້າສູ່ໂຫມດ ຄຳ ສັ່ງຂອງຮາດດິດສະເພາະ.
fdisk /dev/sda
ຫຼັງຈາກເຂົ້າໄປໃນຮູບແບບ ຄຳ ສັ່ງ, ຕອນນີ້ກົດປຸ່ມ "n" ເພື່ອສ້າງພາທິຊັນ ໃໝ່ ພາຍໃຕ້/dev/sda ທີ່ມີຂະ ໜາດ ສະເພາະ. ນີ້ສາມາດໄດ້ຮັບການສະແດງອອກໂດຍການຊ່ວຍເຫຼືອຂອງຜົນໄດ້ຮັບທີ່ໄດ້ຮັບ.
fdisk /dev/sda WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): n Command action e extended p primary partition (1-4) e
ໃນຂະນະທີ່ ກຳ ລັງສ້າງພາທິຊັນ ໃໝ່, ມັນຈະຖາມສອງທາງເລືອກໃນການຂະຫຍາຍການແບ່ງປັນ. ກົດປຸ່ມ 'e' ສຳ ລັບການແບ່ງປັນຂະຫຍາຍແລະ 'p' ສຳ ລັບການແບ່ງປັນຫລັກ. ຫຼັງຈາກນັ້ນມັນຈະຂໍໃຫ້ທ່ານປ້ອນຂໍ້ມູນສອງຢ່າງຕໍ່ໄປນີ້.
<
ທ່ານສາມາດໃສ່ຂະ ໜາດ ຂອງກະບອກໄດ້ໂດຍເພີ່ມ "+ 5000M" ໃນກະບອກກະຖັດສຸດທ້າຍ. ນີ້, "+" ໝາຍ ເຖິງການເພີ່ມແລະ 5000M ໝາຍ ຄວາມວ່າຂະ ໜາດ ຂອງການແບ່ງປັນ ໃໝ່ (ຕົວຢ່າງ 5000MB). ກະລຸນາຈື່ໄວ້ວ່າຫຼັງຈາກສ້າງພາທິຊັນ ໃໝ່, ທ່ານຄວນ ດຳ ເນີນການ ຄຳ ສັ່ງເພື່ອປ່ຽນແປງແລະບັນທຶກການປ່ຽນແປງ ໃໝ່ ໃນຕາຕະລາງການແບ່ງປັນແລະສຸດທ້າຍກໍ່ເລີ່ມຕົ້ນລະບົບຂອງທ່ານເພື່ອກວດສອບການແບ່ງປັນທີ່ຖືກສ້າງຂື້ນ ໃໝ່.
Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks.
7. ວິທີການຈັດຮູບແບບ Partition ໃນ Linux
ຫຼັງຈາກການສ້າງພາທິຊັນ ໃໝ່, ຢ່າຂ້າມເພື່ອຈັດຮູບແບບພາທິຊັນທີ່ສ້າງຂື້ນ ໃໝ່ ໂດຍໃຊ້ ຄຳ ສັ່ງ 'mkfs'. ພິມ ຄຳ ສັ່ງຕໍ່ໄປນີ້ຢູ່ໃນປາຍທາງເພື່ອຈັດຮູບແບບການແບ່ງສ່ວນ. ນີ້/dev/sda4 ແມ່ນພາກສ່ວນສ້າງ ໃໝ່ ຂອງຂ້ອຍ.
mkfs.ext4 /dev/sda4
8. ວິທີການກວດສອບຂະ ໜາດ ຂອງ Partition ໃນ Linux
ຫຼັງຈາກການຈັດຮູບແບບການແບ່ງປັນ ໃໝ່, ກວດເບິ່ງຂະ ໜາດ ຂອງພາທິຊັນນັ້ນໂດຍໃຊ້ທຸງ 's' (ສະແດງຂະ ໜາດ ຂອງທ່ອນໄມ້) ດ້ວຍ ຄຳ ສັ່ງ fdisk. ວິທີນີ້ທ່ານສາມາດກວດສອບຂະ ໜາດ ຂອງອຸປະກອນສະເພາະໃດ ໜຶ່ງ.
fdisk -s /dev/sda2 5194304
9. ວິທີການແກ້ໄຂ ຄຳ ສັ່ງຕາຕະລາງ Partition
ຖ້າທ່ານໄດ້ລຶບພາທິຊັນທີ່ມີເຫດຜົນແລະສ້າງມັນຂື້ນ ໃໝ່, ທ່ານອາດຈະສັງເກດເຫັນ 'ການແບ່ງປັນອອກຈາກ ຄຳ ສັ່ງ' ມີປັນຫາຫລືຂໍ້ຄວາມຜິດພາດເຊັ່ນວ່າ 'ການໃສ່ຕາຕະລາງການແບ່ງປັນບໍ່ໄດ້ຢູ່ໃນການຈັດເກັບແຜ່ນ'.
ຍົກຕົວຢ່າງ, ເມື່ອສາມພາກສ່ວນທີ່ມີເຫດຜົນເຊັ່ນ (sda4, sda5 ແລະ sda6) ຖືກລຶບອອກ, ແລະການສ້າງພາທິຊັນ ໃໝ່, ທ່ານອາດຄາດຫວັງວ່າຊື່ການແບ່ງປັນ ໃໝ່ ຈະເປັນ sda4. ແຕ່, ລະບົບຈະສ້າງມັນເປັນ sda5. ສິ່ງນີ້ເກີດຂື້ນຍ້ອນວ່າ, ຫຼັງຈາກການແບ່ງປັນຖືກລຶບອອກແລ້ວ, ການແບ່ງປັນ sda7 ໄດ້ຖືກຍ້າຍເປັນ sda4 ແລະປ່ຽນພື້ນທີ່ຫວ່າງໄປຈົນສຸດທ້າຍ.
ເພື່ອແກ້ໄຂບັນຫາການສັ່ງແບ່ງປັນດັ່ງກ່າວ, ແລະມອບ sda4 ໃຫ້ກັບພາທິຊັນທີ່ສ້າງຂື້ນ ໃໝ່, ໃຫ້ອອກ 'x' ເພື່ອເຂົ້າພາກສ່ວນທີ່ມີ ໜ້າ ທີ່ເພີ່ມເຕີມແລະຫຼັງຈາກນັ້ນໃສ່ ຄຳ ສັ່ງຜູ້ຊ່ຽວຊານເພື່ອແກ້ໄຂ ຄຳ ສັ່ງຂອງຕາຕະລາງການແບ່ງປັນດັ່ງທີ່ສະແດງຢູ່ຂ້າງລຸ່ມ.
fdisk /dev/sda WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): x Expert command (m for help): f Done. Expert command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks.
ຫຼັງຈາກ, ແລ່ນ ຄຳ ສັ່ງ 'f', ຢ່າລືມທີ່ຈະ ດຳ ເນີນການ ຄຳ ສັ່ງເພື່ອບັນທຶກແລະອອກຈາກ ໂໝດ ຄຳ ສັ່ງ fdisk. ເມື່ອມັນມີການ ກຳ ນົດ ຄຳ ສັ່ງຕາຕະລາງການແບ່ງປັນ, ທ່ານຈະບໍ່ໄດ້ຮັບຂໍ້ຄວາມຜິດພາດອີກຕໍ່ໄປ.
10. ວິທີການປິດທຸງ Boot (*) ຂອງ Partition
ໂດຍຄ່າເລີ່ມຕົ້ນ, ຄຳ ສັ່ງ fdisk ສະແດງໃຫ້ເຫັນສັນຍາລັກ boot (i. e. * *) ສັນຍາລັກໃນແຕ່ລະສ່ວນ. ຖ້າທ່ານຕ້ອງການເປີດຫລືປິດທຸງບູດໃນພາທິຊັນສະເພາະ, ໃຫ້ເຮັດຕາມຂັ້ນຕອນຕໍ່ໄປນີ້.
fdisk /dev/sda
ກົດປຸ່ມ 'p' ເພື່ອເບິ່ງຕາຕະລາງການແບ່ງປັນປະຈຸບັນ, ທ່ານເຫັນວ່າມີປ້າຍທຸງ (ສັນຍາລັກ (*) ເປັນສີສົ້ມ) ໃສ່/dev/sda1 ແຜ່ນດັ່ງຮູບຂ້າງລຸ່ມນີ້.
fdisk /dev/sda WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 2624 20972857+ 83 Linux /dev/sda3 2625 4582 15727635 83 Linux /dev/sda4 4583 77541 586043167+ 5 Extended /dev/sda5 4583 5887 10482381 83 Linux /dev/sda6 5888 7192 10482381 83 Linux /dev/sda7 7193 7845 5245191 83 Linux /dev/sda8 7846 8367 4192933+ 82 Linux swap / Solaris /dev/sda9 8368 77541 555640123+ 8e Linux LVM
ຖັດໄປໃສ່ ຄຳ ສັ່ງ ‘ເປັນ’ ເພື່ອປິດທຸງ boot, ຫຼັງຈາກນັ້ນໃສ່ເລກແບ່ງປັນ ‘1’ ຄື (i. e./dev/sda1) ໃນກໍລະນີຂອງຂ້ອຍ. ນີ້ຈະປິດການໃຊ້ງານທຸງ boot ໃນສ່ວນແບ່ງ/dev/sda1. ສິ່ງນີ້ຈະເອົາທຸງດາວ (*) ອອກ.
Command (m for help): a Partition number (1-9): 1 Command (m for help): p Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 13 104391 83 Linux /dev/sda2 14 2624 20972857+ 83 Linux /dev/sda3 2625 4582 15727635 83 Linux /dev/sda4 4583 77541 586043167+ 5 Extended /dev/sda5 4583 5887 10482381 83 Linux /dev/sda6 5888 7192 10482381 83 Linux /dev/sda7 7193 7845 5245191 83 Linux /dev/sda8 7846 8367 4192933+ 82 Linux swap / Solaris /dev/sda9 8368 77541 555640123+ 8e Linux LVM Command (m for help):
ຂ້າພະເຈົ້າໄດ້ພະຍາຍາມຈົນສຸດຄວາມສາມາດຂອງຕົນໃນການລວມເອົາເກືອບທຸກ ຄຳ ສັ່ງພື້ນຖານຂອງ ຄຳ ສັ່ງ fdisk, ແຕ່ວ່າຍັງ fdisk ມີ ຄຳ ສັ່ງຊ່ຽວຊານອື່ນໆທີ່ທ່ານສາມາດໃຊ້ພວກມັນໄດ້ໂດຍການເຂົ້າ 'x'. ສຳ ລັບຂໍ້ມູນລາຍລະອຽດເພີ່ມເຕີມ, ໃຫ້ກວດເບິ່ງ ຄຳ ສັ່ງ ‘man fdisk’ ຈາກສະຖານີ. ຖ້າຂ້ອຍຂາດ ຄຳ ສັ່ງທີ່ ສຳ ຄັນ, ກະລຸນາແບ່ງປັນກັບຂ້ອຍຜ່ານພາກ ຄຳ ເຫັນ.
ອ່ານອີກ:
<